Greg
Logue
Email b9greg@rap.midco.net
Vendor
since: February 19th, 2005
* Please
email for availability before sending any funds. * All prices do not include shipping - Please include your shipping address so that I can give you a complete total.
Steel Brain with Stainless Steel Top Plate
Price: $245 "plus shipping. (Cost of Insurance added by your request)"
(Click on images to enlarge)
Fully laser cut steel parts - solder welded together and then cleaned, primed and finished. Ready to be painted the color of your choice.
This part is only done by runs - which will be posted to the club in the late winter time frame.
I can put your name on the list if you miss the sign-up period.
Backbround information - I have built over 120 of these to date - I have the experience.
See below for more pictures of the completed part.
All questions or requests must be emailed to me at :
b9greg@rap.midco.net - Thank You
Radar Animation Gear Kit
Price: $100
"Just what
you need to get your Radar Section moving!!"
* This Radar Animation Gear Kit will fit both the Tim K Torso Radar Section and my New V2 Torso Radar Section. * kit
includes Gear Set with two small gears, and Complete
Instructions.
Kit DOES NOT include Lee Valley 12K6809 9" Aluminum Lazy Susan Bearing.
Click Here to go to Lee Valley Lazy Susan page
Detail
Photo of Gears
Email for availability
or if you have a question:b9greg@rap.midco.net
Radar Motor Info
I am no longer carrying the Radar Motor. However....
Here's the information to order one directly from the distributor:
Jim Beam at Jbeam@comp-tech.com
Part Number for the Motor is: #TG-47G-SG-75-HA, 12V. (12 volt)
(This is an updated motor from the original discontinued model. (4/10/21)
The change is to a first stage helical gear which makes the gear motor quieter, but that's it.)
Here is the complete contact info for the distributor:
Jim Beam
Component Technology, Inc.
14390 E. Hampden Ave.
Aurora, CO 80014
jbeam@comp-tec.com
303-850-0087 (Office)
303-521-6680 (Cell)
www.comp-tec.com
Rubber Arm & Neck Support Rings
Price for full set: $50
* Arm
Support Rings only - $ 40.00
* Neck Support Rings only - $35.00
Parts
have been designed to work with Will Huff's rubber parts and are
all laser cut from .040 black styrene.
* Full set includes
9 sized rings for the ribs in the Radar Boot and 18 rings for the
Arms. The rings for the arms are designed to be placed in every
other rib and these can be used in any configuration that your robot
is in. Static Display, Motorized Arms, or Costume!
Arm
Ring Photo
|