Vendor's Name

Email  jerrychevalier@verizon.net or visit myb9experience.blogspot.com

Vendor since: July 25th, 2008              

NOTES:

1. Pricing is done 2 ways. Tell me if you are doing a “Now” order or if you will wait for a quarterly “run” to get the discounted prices. I will be holding quarterly “runs” where multiple people can order the same items at the same time.  The quarterly runs will be held each January, March, June and October.
2. Non Club Members add 10% to the stated costs.
3. 50% Deposit required to start orders.
4. Each assembly includes hardware, but does not include gas struts, motors, rollerballs, electronics.
5. Single orders are not anodized.
6. All unit prices are un-assembled.
7. Price does not include shipping, Insurance or PayPal fees.

Drive Assembly

One Unit $1350 (Version #1)
5 Units $750 (Version #1)

One Unit $1375 (Version #2)
5 Units $795 (Version #2)

This requires 2 NPC-B81 and B82 motors with 6” 60 durometer wheels; removal of motor brake and machining of motor head length to fit (not included). We can do this work for you if you wish for an additional fee.

Leg Section

One Unit $1500 (Tilting)
5 Units $975 (Tilting)

One Unit $1200 (Non - Tilting)
5 Units $825 (Non - Tilting)

Tilting leg section (waist rotation assembly not included.)  2 Leg struts (not pictured) are required for this section.

Tilting Hip Motor Assembly

One Unit $400
5 Units $295

Hip motor bracket (an option if you were to buy the fixed leg section and wanted to upgrade to a moveable hip later.

4 Level CSS Unit

One Unit $450
5 Units $350

An optional top plate for speaker mounting is available for an extra charge.

Bubble Lifter Assembly

One Unit $300
5 Units $175

Bubble Lifter (GWS 777 servo with GWS PD-2 recommended but not included).

"Diet" Waiste Plate Assembly

One Unit $475
5 Units $395

Machined Aluminum.

Torso Rotation Assembly

One Unit $275
5 Units $200

Waist rotation assembly. Motor and gear not included.

Teeth Lights Button Backer Plate

One Unit $75
5 Units $55

Button backer Plate. Please note this should be used with Craig R’s new laser cut Bezel and buttons.

Click here to download a MicroSoft Word document: B9 Teeth Light Wiring tutorial.doc

Donut Support with Cam Locks

One Unit $325
5 Units $310

Donut support ring with cam twist locks.

Machine the Club Donut

$150

Includes truing the donut for the rockler bearing, cutting the donut to fit the twist locks.

If the twist locks and delin support ring are purchased together then they will be fitted to the donut.

   Machined Donut Photo 2

Machine the NPC Motor

$300

Machining the motors includes milling, drilling and taping of the axles, removal of the brake and milling the end of the motor casing 1.25” and milling the wheels to fit the drive assembly.

It is strongly suggested that when you buy the drive section you also buy the NPC motors and wheels and send them to us so it can all be done together.

   Machined Wheel Photo 2

Soil Sampler Rework

$100

Refit a Mike Joyce Soil sampler to work with my Drive section.
This includes new side plates and installation.

Email  jerrychevalier@verizon.net or visit myb9experience.blogspot.com