 |
|
| Parts Store ->Vendors->Norman Sockwell View this Vendor's Feedback | |||
Email scifimetropolis@gmail.com Vendor since: July 10th, 2003 
V2 Hand-laid Fiberglass Torso
Please Note: The v2 Torso is slightly smaller in size than previous club torsos, so there are a few parts that also need to be v2 sized. .jpg) V2 Hand-laid Fiberglass Donut
The V2.0 Torso and Donut Package
Lightweight Fiberglass Wrists (only 10 oz. each!) These very lightweight wrists (only about 10 oz. each!) are a must if you are animating your robot or making a costume where weight is critical. Wrists come as pictured.
Price: Email for availability and current price CNC machined aluminum Brain Cup designed to work with animated finger light rods. Includes holes for brain attachment, tapped holes for Neck Bracket attachment! Works with Brain Cam sold below. Or get the Brain Cup, Neck Bracket, Cam and Crown Shaft as a Combo and save money!
Price: Email for availability and current price CNC machined nylon Brain Cam designed to work with animated finger light rods. Includes hole for crown shaft sold below. Works with Brain Cup. Or get the Brain Cup, Neck Bracket, Cam and Crown Shaft as a Combo and save money!
Price: Email for availability and current price CNC machined aluminum Crown Shaft designed to work with animated finger light rods. Includes holes for Crown attachment. Works with Brain Cam. Designed to use a 1" length of 3/16" fuel hose to couple the motor shaft to the Crown shaft. (Motor not included.) Or get the Brain Cup, Neck Bracket, Cam and Crown Shaft as a Combo and save money!
Price: Email for availability and current price Designed to work with the Brain Cup. This design by Mike J. allows you to use a Hankscraft motor to drive your crown and finger lights cam. It also allows you to use a 1.5" PVC pipe for a neck support. Or get the Brain Cup, Neck Bracket, Cam and Crown Shaft as a Combo and save money!
Price: Email for availability and current price Get the entire combo and save!
Price: Email for availability and current price Perfect CNC machined rod ends for the finger lights. You supply the 1/4" rod material, sockets and bulbs.
Price: Email for availability and current price These ear posts are based on the research done by Craig R. Machined from aluminum and designed to work with "micro-mo" motors for sensor rotation.
Price: Email for availability and current price Aluminum wrists! What more do we need to say!
Price: Email for availability and current price Side Panels (see below) Includes
the upper and lower knee plates, hinges, soil sampler door. There is also a handy cutout for your own power connector (connector not Included). Features CNC cut parts and professionally
welded construction!
Price: A full set of 32 beautiful CNC machined aluminum wheels with holes like the original. Wheel bearings are from avid racing and are $65 per set if needed. I will supply info to members so they can order them if desired.
Price: Email for availability and current price
+ Shipping Custom
molded urethane rubber components for the B9 Robot. All dimensions
taken from either the original stone molds or existing blueprints
to allow for the most accurate set of rubber components for the
B9 ever!
Price: Email for availability and current price Designed
specifically to duplicate the robot's arms! These functional and
durable arms will last a lifetime.
Price Email for availability and current price, (Shipping within the US is $30) Acrylic Bubble and Bottom Plate.
Laser Cut Collar Kit with Laser Cut Ribs
Price: Email for availability and current price
With this kit you'll be able to make your own B9 Collar. Crystal clear! Everything is laser cut, even the ribs.
Click on each below for larger pictures.
Price: Email for availability and current price Easy
to assemble using acrylic solvent to "weld" the parts
together. Design allows the use of a 1.5" dia PVC pipe as the
neck support for the bubble. Recently updated for perfect accuracy.
Price: Email for availability and current price For
use with my Bezel. Comes with colored gels if you wish to duplicate
the 2nd/3rd season look.
Price: Email for availability and current price Brushed
stainless steel. These were done as a special run and once
gone that is it.
CNC Machined Keyed Waist Plate Price: Email for availability and current price Very
nice Keyed waist plate CNC cut from durable 1/2" thick black ABS.
CNC Machined Sub Waist Plate Price: Email for availability and current price Very
nice Sub waist plate CNC cut from durable 1/2" thick black ABS.
V2 Donut to Waist Plate Twist Lock Ring
Price: Email for availability and current price
Cut out to fit the V2 Donut. Use this to easily twist and remove your V2 Torso from the V2 Donut.
Click on each pcture below to see this installed. 
Metal cast Ear Sensor Holders and CNC cut sensors Price: Email for availability and current price Very nice. Accurate to original in every curve.
Price: Email for availability and current price
TIG welded aluminum leg supports that work with my rubber legs. Also verified to work with Dewey's latex legs and should work with any rubber legs built to club standards. Designed to give the "squished" look to you rubber legs. Using my 1/2" sub waist plate the legs are about 14.5" tall. $125 per set + shipping.
Price: Email for availability and current price Sturdy vacu-formed constuction. Simply trim to match your treadsection and attach as desired. (Does not come pre-drilled.)
|
|||
Norman
Sockwell 
