Bill Kendzierski & Rod Rickenbach

Email Bill K.& Rod R. at immortalcreations@gmail.com

Vendors since: July 10th, 2003              

Contact Bill or Rod to order.  Prices do not include shipping.

Crown

Non-member Price $115

Member Price $100

A Crown Fit For A King!
I've gone over the top here to make the ultimate B9 crown for my robot! Meticulously researched to duplicate the look of perfection, even detailing the riveted fins. This crown is made entirely out of Stainless Steel - 38 parts in all. 12 Laser cut and hydraulic press bent Stainless fins, a laser cut Stainless mounting disc, a machined Stainless shaft collar, and even Stainless rivets with Stainless mandrels! Carefully hand assembled, resulting in an 8 ounce piece of Stainless Steel art. No polishing was necessary! When the pyramids have turned to dust, this crown will be still be around, sparkling in the sunlight.

Sensors

Non-member Price $75(kit)

Member Price $65(kit)

Ear sensors based upon Craig R.'s incredibly accurate masters. These feature laser cut dishes and cast resin dish holders! Available as a kit or finished.

Resin Ear Posts

Non-member Price $45

Member Price $40

Available in cast in resin. (Aluminum version in photo is no longer offered.)

Power Pack

Non-member Price $175(kit)

Member Price $150(kit)

The finishing touch to your robot! To give a brief history, the power pack is actually a component of a piece of military equipment that was used in the 60's. At the time, it was salvaged from the equipment, modified it by adding 3 phono jacks, replaced some screws and covered the electronics with clear plastic. I was able to secure another original component identical to the one used on the show and cast resin copies of the frame components. The circuitry was then created using art work of the original. The printed circuit board was professionally etched, tin plated, drilled and routed to the specs of the original. Since the original power pack was part of military equipment all the electronic components are, of course, military grade. So, to be totally authentic I used actual military grade electronics from that time period in the power pack. The 2 different greenish colors that are on the various frame components were computer color matched from the originals. The paint used is a custom industrial mix. The finished piece is not only the most accurate replica of the original power pack, but a work of art in itself. Check out the pics below to see the details! Much thanks to Mike D. for his help in creating the power pack. Cast resin frame is standard. Available with optional cast pewter frame (additional $100).

Complete Power Pack Kit
This kit contains the frame and end connectors, power pack electronics, circuit board plus all hardware to build the most accurate B-9 power pack replica ever made. Complete assembly instructions are included.
Complete Power Pack Kit…… $150 members $175

Power Pack Circuit Board Only
This circuit board is the perfect start for those who wish to build their own power pack. The board is CNC trimmed and all the holes come pre-drilled to the correct sizes to accommodate the electronic components. One side is copper and the other is pre-tinned…….
Circuit Board……… $25 members $35 non-members

Power Pack Electronics Parts Only Kit
This kit includes all the electronic components needed to build a complete power pack. Most of the components are vintage, military grade as used in the original and include decals for total accuracy. The kit includes 20 components including resistors, transistors and capacitors.
Kit….. $25 members $35 non-members

Power Pack Frame and End Connectors (resin)
The frame, large end connector and small end connector were cast off of original parts like the ones used to make the power pack on the TV show. These require minor finishing and painting. Color chips are included to assist in painting.
Frame and End Connectors……. $75 members $85 non-members

Power Pack Frame Only in Pewter
Pewter Frame…… $100 members $125 non-members

Claws & Wrists

Non-member Price $380

Member Price $350

Painstaking 3D CAD research went into making these the most accurate wrists and claws yet made! The built in mechanism allows the centers to rotate and the claws to move in sync. Requires very little finish work before you paint. Claws alone are priced at $175(member 's price, $150). Wrists with centers are $225 (member's price, $200).

Torso Microphone

Non-member Price $35(resin)   $65(pewter)

Member Price $28(resin)   $60(pewter)

The perfect Microphone head for your torso. Available in resin or cast pewter.

Programming Bay Potentiometer

Non-member Price $12

Member Price $10

Cast Resin Potentiometer for the programming bay.

Torso Knob

Non-member Price $12

Member Price $10

Cast Resin toro knob. This includes the tapped hole and set screw!

Chest Buttons
Light Box

Non-member Price $70

Member Price $65

The lightbox was designed to mount on the inside of the torso, behind the front teeth lights. It is made of laser cut stainless steel, slightly over 1/32" thick. The laser cut stainless steel was precision press bent to make the final box.
The front of the box is curved to match the curve of the inside of the torso. The inside of the box is a mirror finish, just like the finish on my stainless steel crown. There are two pre-wired "twist lock" style lamp bases in the back of the box to hold the light bulbs in place. Since they are twist lock style, I never have to remove the light box assembly to change a bulb! The mirror finish combined with the two lights gives a nice even illumination to all 10 chest buttons.

Robot Reference Photos
available on 2-CD's or 1-DVD

Non-member Price $25

Member Price $20

Hi-resolution scans take from publicity photos. Dozens of close up shots showing amazing detail. A must have reference set!